To Next PageTo Next Page
Need help?Do you have a question about the Ferm CRM1045 and is the answer not in the manual?
General| Power source | Electric |
|---|---|
| Maximum pressure | 8 bar |
| Voltage | 230 V |
| Tank capacity | 24 liters |
| Power | 1100 W |
Detailed technical data including voltage, frequency, capacity, and pressure limits.
Lists components of the compressor as shown in Fig. A for identification.
Explains hazard symbols used throughout the manual to denote risks.
Provides critical warnings and guidelines for safe operation and handling of the compressor.
Details earthing requirements and safe electrical connections for the compressor.
Instructions for placing and setting up the compressor in a suitable environment.
Guide to setting the desired output pressure using the regulator and pressure gauges.
Outlines essential care steps, including cleaning the housing and ventilation slots.
Addresses potential problems like air loss, failure to start, or not shutting off.
Covers draining the tank, cleaning the air filter, and replacing/topping up oil.
Details on proper disposal, recycling, and warranty conditions for the compressor.
