To Next PageTo Next Page
Need help?Do you have a question about the Ferm FCT-400F and is the answer not in the manual?
General| Power | 400 W |
|---|---|
| Chuck size | 10 mm |
| Drilling capacity in wood | 20 mm |
| No load speed | 0-3000 RPM |
| Frequency | 50 Hz |
| Voltage | 220-240V |
Details voltage, frequency, power, speed, weight, and sound levels.
Explains common safety symbols used throughout the manual.
Provides specific guidelines for safe operation and handling of the tool.
Outlines precautions related to electrical hazards and connections.
Emphasizes unplugging the tool before starting accessory installation.
Step-by-step guide to inserting and securing accessories.
Instructions on switching on, adjusting speed, and handling the tool.
Instructions for connecting the flexible shaft to the tool.
Guidance on attaching and adjusting the support stand.
Notes on using third-party accessories and checking RPM compatibility.
Safety reminder to unplug the machine before maintenance.
Guidelines for regular cleaning of the tool's housing and vents.
Information on whether additional lubrication is required.
Advice on what to do if a fault occurs.
Information on packaging disposal and recycling electronic waste.
Information on obtaining and understanding warranty conditions.
