To Next PageTo Next Page
Need help?Do you have a question about the Ferm MMH-600 and is the answer not in the manual?
General| Diode Test | Yes |
|---|---|
| Transistor Test | Yes |
| Continuity Test | Yes |
| Square Wave Output | No |
| DC Voltage | 600V |
| AC Voltage | 600V |
| DC Current | 10A |
| Display | LCD |
| Power Supply | 9V battery |
Details product name, type, item number, and specifications.
Specifies operating and storage temperature ranges and humidity limits.
Explains calibration tolerances and the required battery type.
Emphasizes reading instructions and safety for proper multimeter operation.
Outlines general safety principles for using the multimeter safely and effectively.
Details specific precautions for handling high voltages and protecting the device.
Advises on recycling packaging and proper disposal of used batteries.
Guidance on retaining original packaging and contacting service for assistance.
Instructions for initial setup, range selection, power switch, and connection checks.
Lists the types of measurements the multimeter can perform.
Step-by-step guide for measuring DC voltage, including range, accuracy, and connection.
Step-by-step guide for measuring AC voltage, including range, accuracy, and connection.
Step-by-step guide for measuring DC current, including range, accuracy, and connection.
Step-by-step guide for measuring resistance, including range, accuracy, and connection.
General maintenance and cleaning instructions, with cautions on solvents and plastic care.
Procedure for safely replacing a blown fuse, including necessary precautions.
Instructions for replacing the 9V battery, including safety warnings.
