8
EN
Regularly clean the machine housing with a soft
cloth, preferably after each use. Keep the
ventilationslotsfreefromdustanddirt.Ifthedirt
does not come off use a soft cloth moistened with
soapy water. Never use solvents such as petrol,
alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Pleasendsomepotentialcausesandsolutions
to possible failure.
• Theelectriccircuitisbroken
• Havetheelectriccircuitrepaired
• Wiresinthemainsplugorinthesocketare
loose
• Havesocketandplugcheckedorrepaired
• Theswitchisfaulty
• Havetheswitchrepaired
• Bluntordamagedcutter
• Re-sharpenorreplacecutter
• Variablespeedsetlow
• Increasevariablespeed
• Motorisoverloaded
• Reducepushingforceonrouter
• Bentcuttershank
• Replacecutter
• Carbonbrushesareworn
• Replacethecarbonbrushes
Should a fault occur, e.g. after wear of a part,
please contact the adress on the warranty card.
Includedyoundanexplodedviewshowingthe
parts that can be ordered.
Inordertopreventthemachinefromdamage
during transport, it is delivered in a sturdy
packaging. Most of the packaging materials can
be recycled. Take these materials to the
appropriate recycling locations.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/EU
for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
The guarantee conditions can be found on the
separately enclosed guarantee card.
The product and the user manual are subject to
change.Specicationscanbechangedwithout
further notice.