4
EN
ROUTER
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe’s leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
For your own safety and for the safety of
others, please read these instructions
carefully before using this appliance. It
will help you understand your product
more easily and avoid unnecessary risks.
Keep this instruction manual in a safe
place for future use.
Introduction
The router has been designed for routing of wood
and wood products. Check the machine, for loose
parts and accessories from transport damage.
Contents
1. Machine specifications
2. Safety instructions
3. Assembly
4. Operation
5. Maintenance
1. MACHINE SPECIFICATIONS
Technical specifications
Voltage 230-240 V~
Frequency 50 Hz
Power input 1200 W
No load speed 9.000 - 30.000/min
Cutting depth 35 mm
Collet 8 mm
Weight 3.5 kg
Lpa (sound pressure) 87dB + 3 dB(A)
Lwa (sound power) 98dB + 3 dB(A)
Vibration 4.02 +1.5 m/s
2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given
in EN 62841-1, EN 62841-2-17; it may be
used to compare one tool with another and
as a preliminary assessment of exposure to
vibration when using the tool for the applications
mentioned
• using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
• the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level
• the vibration emission during actual use of the
power tool can differ from the declared total
value depending on the ways in which the tool
is used;
• need to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such
as the times when the tool is switched off and
when it is running idle in addition to the trigger
time).
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of packing
1 Router
1 Parallel guide
1 Carbon brush set
1 Template guide
1 Centre pin
1 Adapter for dust extraction
1 Spanner
1 Collet 8 mm (assembled on the machine)
1 Collet 6 mm
3 Router bits
1 Safety instructions
1 Operating instructions
1 Warranty card
Product information
Fig. A+B+C
1. On/off switch
2. Handle
3. Base plate
4. Fixing screws for parallel fence
5. Spanner
To Next Page
Loading...
Need help?
General