To Next PageTo Next Page
Need help?Do you have a question about the Ferm WEM1035 and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Electrode Diameter | 1.6-4.0 mm |
| Protection Class | IP21S |
| Insulation Class | H |
| Duty Cycle | 60% |
Detailed technical data for the welding appliance including voltage, power, and dimensions.
Interpretation of warning symbols and icons used in the manual for safety awareness.
Guidelines for safe operation, environment, and user preparation before welding.
Crucial safety advice related to welding hazards like fire, fumes, and material handling.
Essential safety measures concerning electrical connections, power supply, and cable handling.
Instructions for assembling and installing the welding mask and fitting electrodes.
Steps and considerations for starting and performing the welding operation.
Explanation of the electric arc welding process, electrode function, and protective measures.
Guidance on preparing the machine and workpiece for welding, including test runs.
Procedures for keeping the welding machine in good working order and ensuring longevity.
Common issues encountered during operation and their potential causes.
Troubleshooting common welding appliance faults and their resolutions.
Recommendations for cleaning the machine and details on lubrication requirements.
Information on proper disposal of electronic waste and warranty conditions.
