Fermax SKYLINE VDS / BUS2 User Manual

Pag 9
Pag 9
DIGITDIGIT
DIGITDIGIT
DIGIT
AL AL
AL AL
AL
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
DIGITDIGIT
DIGITDIGIT
DIGIT
AL AL
AL AL
AL
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
DIGITDIGIT
DIGITDIGIT
DIGIT
AL AL
AL AL
AL
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
DIGITDIGIT
DIGITDIGIT
DIGIT
AL AL
AL AL
AL
VDS - BVDS - B
VDS - BVDS - B
VDS - B
US2US2
US2US2
US2
EN
PROGRAMMING GUIDE
EN
PROGRAMMING GUIDE
AB21AB
0
19025
24797
Programming
To set up the system it is necessary to enter the programming mode. To
enter programming mode dial ‘0’ + ‘AB21AB’ and the programming code.
This device has two access levels (with its own different codes and
privileges):
- User level (code 19025): allows add and modify operations with the
user list;
- Administrator level (code 24797): allows any operation in the system
(parameters and user list).
Administrator level
User level
AB21AB
0
19025
24797
Programming
To set up the system it is necessary to enter the programming mode. To
enter programming mode dial ‘0’ + ‘AB21AB’ and the programming code.
This device has two access levels (with its own different codes and
privileges):
- User level (code 19025): allows add and modify operations with the
user list;
- Administrator level (code 24797): allows any operation in the system
(parameters and user list).
Administrator level
User level

Fermax SKYLINE VDS / BUS2 Specifications

General

Brand	Fermax
Model	SKYLINE VDS / BUS2
Category	Intercom System
Language	English