EasyManua.ls Logo

FERMOD KIT 5010 - Using the System; Normal Use; Risks from Third-Party Actions; Identification Stickers

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Kit5010ExpSécu_Elec-A
20
9 - UTILISATION / USING
Respecter les spécications du § 5 - Caractéristiques du produit. Utiliser les commandes prévues (bouton, badge...).
En cas de panne des portes motorisées :
L'utilisateur peut ouvrir la porte en actionnant la poignée intérieure ou extérieure.
Précautions :
En cas d’urgence : Appuyer sur le bouton noir du boîtier de commande (arrêt du moteur).
En cas de panne : Couper le disjoncteur et utiliser les poignées prévues à cet eet.
9.1
UTILISATION PREVUE / NORMAL USING
Respect § 5 specications - Product Characteristics. Use the required commands (wall button, badge ...).
In case of failure:
The user can open the door with the internal or external handle.
Safety measures:
In case of emergency: push on the black button of the wall command box ( stop the motor).
In case of failure: put the switch o and use the required handle.
. Risque d’électrocution
. Ne pas projeter d'eau
. Ne pas projeter de poussières ou de copeaux
. Ne rien introduire dans le coret
électrique
9.2
Risques consécutifs à des actions intentionnelles de personnes autres que l’utilisateur
Risks following intentional acts of persons other than the user
. Danger: risk of electric shock
. Do not spray with water
. Do not spray dust or shavings
. Do not introduce anything into
command box
Plaque moteur / Motor identication
SPECIMEN
SPECIMEN
Support moteur
Motor bracket
SPECIMEN
Entrainement de porte
Door driving assembly
SPECIMEN
Tendeur de courroie
Belt adjuster
Condition de garantie
Warranty conditions
Etiquettes non contractuelles
susceptibles d'évoluer
Stickers data only for information -
Subject to modications
i
9.3
ETIQUETTES D’IDENTIFICATION / IDENTIFICATION STICKERS

Other manuals for FERMOD KIT 5010