To Next PageTo Next Page
Need help?Do you have a question about the Ferris 5900624 and is the answer not in the manual?
General| Engine Displacement | 726 cc |
|---|---|
| Engine Power | 24 hp |
| Cutting Width | 61 in |
| Cutting Height | 1.5 - 5 in |
| Spindle Material | Cast Iron |
| Transmission | Hydro-Gear ZT-3400 |
| Engine | Kawasaki |
| Engine Model | FS730V |
| Deck Material | Steel |
| Speed | 10 mph |
Covers safe operation principles and operator responsibilities for the equipment.
Discusses safe mowing practices and hazards associated with operating on slopes.
Explains the proper use, importance, and operational warnings for the roll bar.
Detailed safety measures and warnings for operating on slopes.
Instructions for proper installation, use, and operational warnings for the roll bar.
Detailed safety protocols for handling flammable gasoline and its vapors.
Details essential safety checks for the unit's interlock systems.
Introduces controls and describes basic functions like speed levers and ignition.
Details specific controls such as parking brake, throttle, choke, and deck lift pedal.
Detailed steps for starting the engine, stopping the rider, and pushing the unit by hand.
Guides on zero-turn practice, basic driving, and turning maneuvers for effective operation.
Instructions on mowing, cutting height, patterns, methods, mulching, and recommendations.
Outlines routine maintenance tasks and recommended service intervals based on usage.
Guides for common rider and mower problems, their causes, and remedies.
Identifies and solves issues related to lawn cutting quality.
Step-by-step instructions for replacing the hydraulic pump drive belt.
Instructions for safely replacing the mower PTO drive belt.
Details on engine make, model, horsepower, displacement, and oil capacity.
