To Next PageTo Next Page
Need help?Do you have a question about the Ferris 5900969 and is the answer not in the manual?
General| Model | 5900969 |
|---|---|
| Category | Lawn Mower |
| Engine Manufacturer | Briggs & Stratton |
| Spindle Material | Aluminum |
| Wheel Size Front | 13 x 6.5-6 |
| Turning Radius | Zero Turn |
Visual symbols used in the manual to convey safety information and hazards.
Explains alert symbol, hazard levels (Danger, Warning, Caution), and icons.
Covers various safety decals and their associated hazards like danger, warning, and caution.
Details warnings for low overhead obstacles and rollover protection structure.
Details the specific tests to verify the proper function of the safety interlock system.
Emphasizes not operating the unit if safety tests fail and warns against defeating the system.
Briefly describes the function of individual controls for starting, stopping, and driving.
Explains how the left and right levers control speed and steering.
Explains how to engage PTO and adjust engine speed using the throttle.
Details parking brake operation and mower deck cutting height controls.
Emphasizes reading manual, familiarization with controls, and practicing in an open area.
Lists essential pre-start checks including oil, hardware, seat position, and fuel.
Warns against operating on slopes over 15 degrees and outlines safe practices.
Provides step-by-step instructions for starting carbureted and DFI engines.
Details the procedure for safely stopping the tractor and disengaging controls.
Guides on smoothly moving control levers for forward motion and practice.
Guidance on practicing backing up safely and controlling reverse movement.
Instructions for practicing turns and zero-radius turns with control levers.
Technique for efficiently turning at the end of a row without stopping.
Factors affecting grass cutting performance and machine longevity.
Guidance on cutting heights and incremental cutting for tall grass.
Strategies for cutting patterns and broadcast mowing with speed guidance.
Guidelines on mowing time, grass condition, and blade sharpness.
Details the mulching process, conditions, and best practices.
Guidelines and warnings for towing trailers with the mower.
Step-by-step instructions for safely lowering and raising the roll bar.
Critical safety warning regarding roll over protection and seat belt use.
Steps for preparing the unit for short-term and extended off-season storage.
Procedures for safely starting the engine after a period of storage.
Lists maintenance tasks for the rider and engine based on usage intervals.
Instructions for checking the engine oil level before each use.
Details recommended tire pressures and safe fueling procedures.
Procedures for replacing the fuel filter and changing engine oil and filter.
How to check the hydraulic oil level and recommended oil types.
Steps for changing the hydraulic oil filter, including notes on dealer service.
Procedure for checking coolant level in the overflow reservoir.
Instructions for cleaning the radiator and screen for proper airflow.
Lists locations requiring grease and oil lubrication, such as pivots and hinges.
Step-by-step guide for lubricating front caster wheels annually.
Instructions for cleaning battery/cables and safety warnings.
Explains the function and adjustment of anti-scalp deck casters.
Instructions for safely removing and inspecting mower blades for wear or damage.
Procedures for sharpening and balancing mower blades to ensure proper operation.
Instructions for correctly reinstalling mower blades with proper torque.
Lists common rider problems, their causes, and remedies.
Lists common mower problems, their causes, and remedies.
Explains causes and remedies for streaking, scalping, and stepped grass cutting.
Addresses causes and solutions for uneven cutting and 'stingers' in grass.
How to adjust the seat forward, backward, and for suspension features.
Adjusting handle alignment, placement, and height of ground speed levers.
Steps to balance top speed of ground speed control levers.
Adjusting linkage rod to ensure levers lock in NEUTRAL position.
Procedure to adjust neutral return rod for proper lever alignment.
Steps to adjust the parking brake for proper spring compression.
How to adjust spring pre-load and rear suspension height for ride comfort.
Detailed steps for setting the mower deck cutting height.
How to adjust the foot pedal and remove/reinstall the floor pan.
Procedure to check and adjust the timing of deck lift rods.
Steps to ensure the mower deck is level for optimal cutting performance.
Detailed instructions for adjusting the inner and outer lift rods for proper deck timing.
Final steps for deck leveling and blade height measurement.
Information about the deck lift spring, noting it's not an adjustment point.
Steps for adjusting PTO clutch for specific engine models.
Adjusting PTO clutch and checking mower blade stopping time.
Instructions for replacing the hydraulic pump drive belt.
Steps for replacing the mower belt on 61" and 72" decks.
How to adjust belt tensioner spring and perform battery maintenance.
How to check battery voltage using a voltmeter.
Detailed steps and warnings for jump starting the vehicle.
Lists specifications for various Kawasaki engine models used in the unit.
Lists specifications for Briggs & Stratton engine models.
Details fuel, tire, hydraulic, and dimensional specifications of the unit.
Instructions for using the guide to identify slope angles.
