EasyManua.ls Logo

Ferris HydroWalk Series User Manual

Ferris HydroWalk Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Print Instructions for Print Vendors (Paper Manuals)
OPERA
TORS
MANUAL
TOTAL PAGE COUNT: Less than 80
Paper Size: • 11 x 17
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover - 1-color, 2-sided
Bindery: • Staple (2X), Face Trim
TOTAL PAGE COUNT: 80 or greater
Paper Size: • 8-1/2 x 11
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover - 1-color, 2-sided
Bindery: • Perfect Bind, Face Trim (3 knife)
GENERAL
COVERS: • Covers are located at the beginning of this package.
• Back cover is the page IMMEDIATELY AFTER the front cover.
• Limited Warranty Statement is the page IMMEDIATELY AFTER the back cover and must be printed
on the inside of the back cover.
• Check the front cover for the individual part number (typically a 2_____ or 502_____ number).
• Check the front cover for the document number (TP 1xx - xxxx - xx - xx - xx)
BODY: •ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS left hand
pages.
General: This instruction page is NOT part of the manual and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
If you have any further questions regarding this manual, please contact the Ferris
Industries Technical Publications Department at (315) 495-0100 ext. 249.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Ferris HydroWalk Series and is the answer not in the manual?

Ferris HydroWalk Series Specifications

General IconGeneral
BrandFerris
ModelHydroWalk Series
CategoryLawn Mower
LanguageEnglish

Summary

Safety Rules & Information

Operator Training

Instructions for operators and mechanics on safe equipment operation.

Pre-Operation Preparation

Steps to ensure safe operation before starting the mower.

Safe Operation Guidelines

Key procedures for safe and proper use of the mower.

Slope Operation Safety

Precautions and techniques for mowing safely on slopes.

Child Safety Measures

Essential precautions to ensure children's safety around the mower.

Maintenance & Fuel Safety

Safety precautions for handling gasoline and performing maintenance.

Roll Bar System Safety

Guidelines for operating and maintaining the Roll Over Protection System.

Identification Numbers

Model Identification and Tags

Location and details of model and serial number identification tags.

Safety Decals

Safety Decal Overview

Explanation of safety labels and their importance for safe operation.

Safety Interlock System

Interlock System Checks

Procedures to verify the functionality of safety interlock switches.

Features & Controls

Control Functions Overview

Descriptions of individual controls like levers, switches, pedals, and ignition.

Operation

General Operating Safety

Essential safety measures before and during operation.

Pre-Start Checks

Procedures for pre-operation checks of the mower.

Engine Starting and Stopping

Step-by-step guides for starting and stopping the engine.

Driving the Mower

Instructions for moving forward, backward, turning, and stopping.

Mowing Procedures

Steps for preparing and executing mowing operations.

Pushing the Mower Manually

Procedure for disengaging the drive system to push the mower manually.

Mower Storage Procedures

Guidelines for temporary and long-term storage of the mower.

Regular Maintenance

Maintenance Schedule and Procedures

A schedule for performing routine maintenance tasks.

Tire Pressure Checks

Instructions and specifications for checking tire pressure.

Fluid and Filter Maintenance

Procedures for checking fuel, oil, air filters, and hydraulic oil.

Lubrication Points

Specific points and procedures for lubricating the mower.

Battery Maintenance

Procedures for checking and cleaning the battery.

Servicing Mower Blades

Instructions for removing, sharpening, balancing, and installing mower blades.

Troubleshooting, Adjustment & Service

Mower Troubleshooting Guide

Common mower problems, their causes, and remedies.

Mower Deck Troubleshooting

Common mower deck problems, their causes, and remedies.

Mowing Height Adjustment

How to adjust the mower deck cutting height.

Idler Pulley Height Adjustment

Procedure for adjusting the idler pulley height on specific models.

Deck Leveling Adjustment

Steps to level the mower deck for even cutting.

Hanger Shaft Shimming

Guidance on using shims for deck leveling adjustments.

Mower Belt Replacement

Instructions for replacing and adjusting mower belts.

Transmission Drive Belt Replacement

Steps to replace the transmission drive belt.

Transmission Adjustments

Procedures for adjusting transmission neutral and tracking.

Transmission Maintenance and Service

Guidelines for maintaining and servicing the hydrostatic transmissions.

PTO Clutch and Blade Brake Service

Adjusting the PTO clutch and checking the blade brake function.

Battery Service and Jump Starting

Procedures for battery maintenance and jump starting.

Specifications

Lawn Care & Mowing Information

Lawn Care Basics

Importance of proper mowing and factors affecting lawn health.

Watering, Fertilizing & Aerating

Best practices for watering, fertilizing, and aerating lawns.

Mowing Height Guidelines

Guidelines on setting the appropriate grass cutting height.

Mowing Frequency and Patterns

Recommendations for mowing times, frequency, and patterns.

Mowing Methods and Clippings

Explains broadcasting, mulching, and handling grass clippings.

Mowing Problem Solutions

Identifies and solves common mowing issues like streaking and stepped cutting.

Specific Mowing Issues

Causes and solutions for uneven cutting, scalping, and stingers.

Common International Symbols

Technical Manuals

Manual Availability

Information on obtaining additional operator and parts manuals.

Related product manuals