EasyManuals Logo

Ferris IS2100Z Series User Manual

Ferris IS2100Z Series
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Thank you for purchasing this quality-built Ferris Commerical
Zero Turn Mower. We’re pleased that you’ve placed your
confidence in the Ferris brand. When operated and maintained
according to the manuals, your Ferris product will provide many
years of dependable service.
The manuals contain safety information to make you aware of
the hazards and risks associated with the unit and how to avoid
them. This Commerical Zero Turn Mower was designed to be
used as described in this operator's manual and operated by
trained professionals for finish cutting of established lawns and
is not intended for any other purpose. It is important that you
read and understand the instructions thoroughly before
attempting to start or operate this equipment. Save these original
instructions for future reference.
This product requires final assembly before use. Refer to the
setup guide for instructions on final assembly procedures. Follow
the instructions completely.
Products Covered by This Manual
The following products are covered by this manual:
5901300, 5901301, 5901302, 5901303, 5901304, 5901307,
5901333
The images in this document are representative, and are meant
to complement the instructional text they accompany. Your unit
may vary from the images displayed.
LEFT
and
RIGHT
are as
seen from the operator's position.
Copyright © Briggs & Stratton Corporation, Milwaukee, WI, USA.
All rights reserved.
Ferris is a trademark of Briggs & Stratton Power Products Group,
LLC
Briggs & Stratton Power Products Group, LLC.
5375 N. Main Street
Munnsville, NY 13409-4003
(800) 933-6175
ferrisindustries.com
Identification Tag Location
The Product Identification tag (A, Figure 1) can be found in the
location shown.
1
Product Identification Tag (Stamped)
PRODUCT REFERENCE DATA
Unit Model Number:
Unit Serial Number:
Mower Deck Model Number: (if
applicable)
Mower Deck Serial Number: (if
applicable)
Dealer Name:
Date Purchased:
ENGINE REFERENCE DATA
Engine Make:
Engine Model:
Engine Type/Spec:
Engine Code/Serial Number
When contacting your authorized service dealer for replacement
parts, service, or information you MUST have these numbers.
NOTE: For the location of the engine identification numbers,
refer to engine owner's manual.
The Illustrated Parts List for this machine can be downloaded
from ferrisindustries.com. Please provide model and serial
number when ordering replacement parts.
3

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ferris IS2100Z Series and is the answer not in the manual?

Ferris IS2100Z Series Specifications

General IconGeneral
Engine BrandBriggs & Stratton
Cutting Height1.5 - 4.5 inches
SuspensionForeFront Suspension System
Horsepower23 HP
Deck Material10-gauge steel
Warranty4-year/500-hour (limited)
Wheel Size13 inches (front)

Related product manuals