Need help?Do you have a question about the Ferris ISX3300 Series and is the answer not in the manual?
General| Fuel Capacity | 9.5 gal (36 L) |
|---|---|
| Engine Type | 4-stroke |
| Transmission | Hydrostatic |
| Cutting Width | 61 inches |
| Turning Radius | Zero-Turn |
| Speed | 10 mph |
Lists the specific Ferris models covered by this manual.
Explains hazard terms like DANGER, WARNING, CAUTION, and NOTICE.
Provides essential safety rules for operating the unit.
Stresses the importance of operator and mechanic training.
Outlines preparation steps for safe operation.
Covers critical safety precautions for handling gasoline.
Provides guidance on maintaining and storing the unit.
Lists critical warnings for using the roll bar.
Decals for pinch point and amputation hazards.
Decals for roll-over and thrown objects hazards.
Warnings for roll bar and overhead obstacles.
Safety decal information for export models.
Warnings about amputation, slope control, and tipping.
Safety information for batteries.
Describes the function of individual controls on the unit.
Identifies and explains the location of zero-turn rider controls.
Explains seat adjustment options.
Explains how ground speed control levers control movement and direction.
Details the control panel for fuel-injected engines.
Explains the control panel for EFI models with ETC.
Essential steps before operating the unit for the first time.
Critical checks to perform before starting the unit.
Step-by-step guide for starting fuel-injected engines.
Procedures for starting various engine types.
Procedures for safely stopping the mower.
Describes the best method for handling ground speed control levers.
Practice steps for forward and reverse travel.
Instructions for practicing zero-turn maneuvers.
Factors affecting grass cutting and recommendations for improvement.
Guidance on appropriate grass cutting heights and timing.
Techniques for mowing patterns to achieve a professional cut.
Explains the mulching process and conditions required.
Details broadcast mowing and its requirements.
Steps for temporary storage of the unit.
Comprehensive steps for storing the unit for extended periods.
Essential maintenance checks to perform before each use.
Maintenance tasks based on operating hours.
Engine maintenance checks before each use.
Safety precautions for performing maintenance procedures.
Instructions for checking and adding fuel safely.
How to inspect the muffler and spark arrester.
Identifies fuse locations, amperage, and circuits.
Step-by-step guide for removing mower blades.
Procedures for inspecting, sharpening, and balancing mower blades.
Instructions for properly installing mower blades.
Explains seat adjustment options.
How to adjust the head rest assembly.
How to balance control levers to prevent drifting.
Deck height adjustment procedures.
How to adjust the deck lift foot pedal for operator comfort.
Instructions for removing and reinstalling the floor pan.
Troubleshooting for engine starting issues.
Troubleshooting for engine performance issues.
Troubleshooting for vibration issues.
Troubleshooting when the brake fails to hold.
Troubleshooting uneven cutting patterns and deck contact.
Troubleshooting waviness and uncut grass patches.
To Next Page