Need help?Do you have a question about the ferroamp EnergyHub and is the answer not in the manual?
Patented technology dynamically transfers energy between phase conductors to limit supply phase currents.
Install current sensors on main feed cables for accurate fuse analysis and measurements.
Guide to enable both ACE function and solar power generation.
Explains how to read and understand grid and load current readings on the display.
Instructions to enable only the ACE function for current balancing.
Steps to enable only solar power generation from PV panels.
General| Model | EnergyHub |
|---|---|
| Manufacturer | Ferroamp |
| Battery Voltage | 48 V |
| Cooling | Convection |
| Protection Class | IP21 |
| Frequency | 50/60 Hz |
| Category | Inverter |
| Product Type | Inverter |
| AC Voltage | 230 V |
| Communication | Ethernet, Modbus |
| Output Voltage | 230 V |
To Next Page