Need help?Do you have a question about the Ferrograph 632 and is the answer not in the manual?
General| Track System | 4-track, 2-channel stereo |
|---|---|
| Signal to Noise Ratio | 55dB |
| Inputs | Microphone, Line |
| Outputs | Line, Headphones |
| Type | Reel to Reel |
| Reel Size | 7-inch |
| Frequency Response | 30Hz - 18kHz at 7.5 ips |
| Output | 1V |
| Power Supply | 110-240V AC, 50/60Hz |
| Tape Speed | 3.75 & 7.5 ips |
| Wow and Flutter | 0.08% at 7.5 ips |
Procedure for connecting the Ferrograph recorder.
Instructions for loading tape onto the Ferrograph.
Guide to playing back recorded tapes on the Ferrograph.
Steps for recording audio onto tape.
Detailed description of the Ferrograph's internal design and components.
Procedures for testing and aligning Ferrograph units.
A guide to diagnosing and resolving common operational faults.
To Next Page
