What to do if my Ferroli 120 Fan fails to produce heat?
If your Ferroli Fan isn't producing heat, there could be a couple of reasons. First, ensure that there is hot water available. You may need to check the boiler. Also, verify that the control panel settings are correct and adjust them as needed.
What to do if my Ferroli Fan fails to produce cold?
If your Ferroli Fan isn't producing cold air, a couple of things might be happening. Check if there is cold water available, inspecting the coolant system. Also, make sure the control panel settings are correct and change them if necessary.
Why the Ferroli 120 Fan fails to turn on?
If the Ferroli Fan isn't turning on, it could be due to a couple of reasons. First, check that there is power. You may need to check the boiler. Also, if it is winter mode, the fan power supply depends on activation of the enabling thermostat (if installed). The ventilating action will only start when the temperature of the water reaches 39°C. You may need to check the boiler.
Details the manufacturer's warranty terms, coverage, and conditions for the appliance.
Lists specific conditions and damages that are not covered by the product warranty.
Outlines instructions whose non-compliance will void the product warranty.
Explains warranty coverage for technical assistance and parts replacement after warranty expiry.
Defines the manufacturer's and installer's responsibilities and limitations of liability.
Describes the function of the convector fan in treating room air for heating and cooling.
Presents the different versions of the convector fan and their installation options.
Provides detailed measurements for the fan coil model with bottom air intake.
Provides detailed measurements for the fan coil model with front air intake.
Details the dimensions for the ducted version of the fan coil unit.
Shows the dimensions and specifications for the fan coil mounting brackets.
Illustrates the plumbing connections for the main coil bank of the fan unit.
Shows plumbing connections for the supplementary coil bank (3-row version only).
Explains the meaning of symbols and codes used in the electrical wiring diagrams.
Details the electrical wiring configurations for the VN series fan motors.
Presents electrical schematics for heat/cool function and speed selector commands.
Shows wiring diagrams for ambient thermostat, heat/cool, and speed selector controls.
Details wiring diagrams for advanced economy, thermostat, heat/cool, and speed selectors.
Lists the items included in the convector fan packaging for installation.
Specifies crucial safety rules and precautions for installing and operating the appliance.
Provides essential advice and guidelines for proper fan coil installation.
Outlines the necessary steps and checks to perform before starting installation.
Offers guidance on selecting the optimal location for installing the fan coil unit.
Lists all the necessary tools for the correct installation of the convector fan.
Details the additional accessories required for the proper installation of the unit.
Provides a step-by-step guide for the physical installation of the fan coil unit.
Explains the procedure for rotating the bank in 3-row versions for plumbing adjustment.
Details the procedures and warnings for making the electrical connections to the unit.
Describes how to reposition electrical components when turning the bank connections.
Explains the various functions and controls for operating the convector fan.
Provides general advice and warnings for cleaning the convector fan safely.
Details the method for cleaning the external surfaces of the fan coil unit.
Describes the step-by-step process for cleaning the unit's air filter.
Explains the procedure for draining condensation from the fan coil unit.
States that the motor is permanently lubricated and requires no periodic lubrication.
Lists common faults, their probable causes, and recommended remedies for the unit.
Guides users on how to obtain technical assistance and order spare parts.
To Next Page
General
