Need help?Do you have a question about the Ferroli KONA 12 and is the answer not in the manual?
General| Brand | Ferroli |
|---|---|
| Model | KONA 12 |
| Category | Water Heater |
| Language | English |
Provides an overview of the KONA water heater's features and intended use.
Explains the meaning of symbols displayed on the unit's control panel.
Details the function of each button on the water heater's control panel.
Overview of the water heater's control panel interface and its components.
Describes the different operating modes and how to use the water heater.
Procedure for switching the water heater between standby and operation modes.
Details normal operation, temperature setting, and domestic hot water supply.
Explains the ECO mode for reduced power consumption and its settings.
Information on activating and configuring the solar energy function.
Details requirements for qualified installers and compliance with standards for water heater installation.
Specifies requirements for the location of the water heater, including ventilation and clearance.
Guides on the physical mounting and connection of the water heater unit.
Instructions for connecting the water inlet and outlet pipes to the unit.
Procedures and precautions for connecting the gas supply to the water heater.
Guidance on safely connecting the unit to the electrical grounding system.
Information on installing air intake and fume exhaust systems for the unit.
Details on how to connect the unit using coaxial air and fume pipes.
Instructions for connecting the unit with separate air and fume pipes.
Procedures for adjusting and configuring the water heater's operational parameters.
Steps to convert the water heater for different types of gas fuel.
Procedure for calibrating the gas valve for optimal performance.
Instructions for replacing the main electronic control board of the unit.
Procedures and checks required for the initial startup of the water heater.
Critical pre-startup checks for gas tightness, water circuit, and electrical connection.
Checks to perform after turning on the unit to ensure proper functioning.
Guidelines for periodic inspections to ensure long-term unit operation.
Details of annual checks required for safety and performance.
Step-by-step guide on how to safely open the water heater's casing.
Information on the unit's self-diagnosis system and troubleshooting fault codes.
A table listing common fault codes and their possible causes.
How to access and view the history of recorded faults on the unit.
Details on adjustable parameters for internal settings and their default values.
Provides dimensional drawings and connection specifications for different models.
Diagram identifying the main components of the water heater.
Comprehensive table of technical specifications and performance data.
Schematic illustrating the electrical connections within the water heater unit.
To Next Page
