Festival Depot PF20135 - User Manual

This document outlines the assembly, safety, and care instructions for a PatioFestival furniture set, specifically a chair and a table.

Function Description

The PatioFestival furniture set includes a chair and a table designed for outdoor use. The chair appears to be a swivel chair, providing flexibility and comfort. The table is a square-top design, suitable for various outdoor settings. The set is intended to provide comfortable seating and a surface for outdoor activities.

Important Technical Specifications

Chair Components (PF20135):

• A: Chair Back (1 pc)
• B: Chair Seat (1 pc)
• C: Chair Base (1 pc)
• D: Chair Leg (1 pc)
• E: Armrests (2 pcs)
• F: Swivel Mechanism (1 pc)
• G: Base Support (1 pc)
• AA: M6*15 Screws (8 pcs for assembly, 16+4pcs for packing list)
• BB: M6*30 Screws (8 pcs for assembly, 16+4pcs for packing list)
• CC: M8*20 Screws (4 pcs for assembly, 8+2pcs for packing list)
• DD: Wrench (1 pc)
• EE: Hex Key (1 pc)

Table Components:

• A: Table Board (1 pc)
• B: Table Leg (4 pcs)
• C: Table Leg Support Ring (1 pc)
• D: M6*15 Screws (8 pcs)
• E: M6*28 Screws (8 pcs)
• F: Washer (16 pcs)
• G: Hex Key (1 pc)

The assembly instructions for the chair detail a four-step process:

1. Attaching the chair back (B) and seat (C) to the chair leg (A) using BB screws.
2. Attaching the armrests (E) to the assembled chair using AA screws.
3. Connecting the swivel mechanism (F) to the chair.
4. Attaching the base support (G) to complete the chair assembly.

The assembly instructions for the table detail a three-step process:

1. Attaching the table legs (B) to the table board (A) using D screws and F washers.
2. Connecting the table leg support ring (C) to the table legs using E screws and F washers.
3. Tightening all screws to complete the table assembly.

Usage Features

The furniture is designed for ease of use and comfort. The chair's swivel mechanism (F) allows for flexible movement, enhancing the user experience. The table provides a stable surface for various outdoor activities.

Maintenance Features

Safety Advice:

• Pre-assembly Check: Ensure all parts are present before starting assembly.
• Assembly Surface: Perform assembly on a soft surface to prevent scratching the finish.
• Sharp Objects: Exercise caution to avoid sharp objects (e.g., garden tools, knives) coming into contact with the furniture, as they can tear fabrics or pierce resin weave, causing permanent damage.
• Prolonging Product Life: It is recommended to cover or store the furniture when not in use to extend its lifespan.

Cleaning Instructions:

• Cleaning Method: Wipe clean with a dry or slightly damp cloth.
• Chemical Products: Do NOT use chemical products for cleaning.

Assembly Tips:

• Hardware and Accessories: All necessary hardware and accessories are included in the set.
• Tools: Do NOT use other electrical or manual tools beyond those provided.
• Screw Tightening: To facilitate assembly and ensure a firm, stable product, tighten screws in a few rounds, one by one. After all screws are connected, tighten them fully.
• Pre-connected Screws: Do NOT tighten any screw to the end before all screws are connected.
• DIY Skills: The assembly requires minimal DIY skills. If you encounter any difficulty or have questions, contact the store or manufacturer.

Contact Information:

• Website: www.festival-depot.com
• Email: info@festival-depot.com
• Location: Pomona, CA