Festo CPV DI01 Series - User Manual

Kurz−
beschreibung
Brief description
CPV−Ventilinsel
mit Direkt−
anschluss
Typ CPV..−DI01
CPV valve termi
nal with direct
connection
type CPV..−DI01
 Deutsch
 English
 Español
 Français
 Italiano
 Svenska
693 391
0503b
Compact Performance

Summary

User instructions

Warning

Safety precautions for connecting, disconnecting, and operating the CPV Direct, especially in explosion-protected environments.

Configuration

Caution

Electronic sensitivity warning for CPV Direct components and handling precautions for ESD sensitive parts.

Warning

Operational warnings regarding switch-on test pulses and emergency stop system status.

DIL switch

Setting the field bus protocol (4-element DIL switch)

Instructions for setting the field bus protocol using a 4-element DIL switch.

Setting the extension of the CP system (4-element DIL switch)

Setting the station number (8-element DIL switch)

Details on setting the station number for various field bus protocols using an 8-element DIL switch.

Set diagnostic mode (only PROFIBUS-DP and ABB CS31, 8-element DIL switch)

Set the field bus baud rate (only Festo field bus, 8-element DIL switch)

Technical specifications

Protection class as per EN 60529 plug connector inserted or provided with protective cap

Protection against electric shock

Protection against explosion

Details explosion protection compliance as per EU guidelines and relevant standards.

Elektromagnetic compatibility

Pin 1 Operating voltage connection for electronics

Pin 2 Load voltage connection

Festo CPV DI01 Series Specifications

General

Switch-on threshold	15 V
Switch-off threshold	5 V
Polarity reversal protection	Yes
Short circuit strength	Yes
Storage temperature	-20 °C ... 70 °C
Protection class	IP65
Input voltage	24 V DC
Operating voltage range DC	18 V ... 30 V
Nominal operating voltage DC	24 V
Ambient temperature	0...+55 °C
Operating temperature	0...+55 °C