Festo EMMT-AS Series User Manual

13 Disposal
ENVIRONMENT!
Dispose of the product and packaging according to the applicable provisions of
environmentally sound recycling.
14 Technical data
Additional information èwww.festo.com/catalogue.
Identifier Description
Motor EMMT-AS -...
U
ZK
[V] Nominal operating voltage DC
I
Nph
[A] Nominal current
I
max
[A] Peak current
I
0
[A] Continuous stall current
P
N
[kW] Nominal power
k
e
[mVmin] Voltage constant
M
N
[Nm] Nominal torque
M
0
[Nm] Stall torque
n
N
[rpm] Nominal rotary speed
n
max
[rpm] Maximum mechanically permissible rotational speed
n
0max
[rpm] Maximum idling speed
Class 155 (F) Temperature class F (155°C)
Holding brake EMMT-AS-...-...B
U
B
[V] Operating voltage DC
Operating and environmental conditions
IPxx Degree of protection
1)
Approval èwww.festo.com/sp
CE mark for the European Union.
2)3)
UL certification mark for the USA and Canada.
RCM certification mark for Australia and New Zealand.
1) For vertical use under the influence of dripping water, a rotary shaft seal must be provided on the motor.
2) Declaration of conformity: all data in accordance with IEC60034.
3) EMC Directive: the product is intended for use in industrial environments. Measures for interference sup-
pression may be required in residential areas. The product may generate high frequency malfunctions,
which may require interference suppression measures in residential areas. Additional measures are
required to comply with the EMC Directive for cables > 30m. Compliance with the EMC Directive is the
responsibility of the user.
Tab. 5 Designations on the product labelling

Festo EMMT-AS Series Specifications

General

Brand	Festo
Model	EMMT-AS Series
Category	Engine
Language	English