To Next PageTo Next Page
Need help?Do you have a question about the Festo PEV-1/4-B-OD and is the answer not in the manual?
General| Mounting position | Any |
|---|---|
| Pilot air supply | Internal |
| Electrical connection | Not applicable |
| Material seals | NBR |
| Protection class | IP65 |
| Operating pressure | 2 ... 8 bar |
| Type of reset | Mechanical spring |
| Sealing principle | Soft |
| Operating medium | Compressed air |
| Medium temperature | -10 ... +60 °C |
| Ambient temperature | -10 ... +60 °C |
| Pneumatic connection, port 1 | G1/4" |
| Pneumatic connection, port 2 | G1/4" |
| Note on materials | RoHS compliant |
| Medium | Compressed air |
| Port size | G1/4" |
Identifies the Festo PEV-1/4-B-OD and PEV-1/4-SC-OD pressure switch models.
Explains the working principle and intended application of the Festo PEV pressure switch.
Outlines essential conditions for the correct and safe operation of the pressure switch.
Step-by-step guide for the mechanical installation of the pressure switch.
Instructions for connecting the pressure switch to the compressed air system.
Guidance on selecting and wiring angled electrical sockets for the pressure switch.
Detailed steps for adjusting the pressure switch's switching point accurately.
Specific procedure for setting the hysteresis on the PEV-1/4-B-OD pressure switch.
Information on how medium temperature fluctuations affect the pressure switch's switching point.
Guidelines for cleaning the exterior of the pressure switch using appropriate agents.
Instructions to re-adjust the switching point when experiencing high switching cycle counts.
Identifies typical faults, their potential causes, and recommended corrective actions.
Lists available accessories for the Festo PEV pressure switch, such as angled sockets.
