Festo VAD Series User Manual

332 852
Bedienungsanleitung
Vakuumsaugdtise
elektrisch
Typ VAD- . . . und
VAD-..:-I-...
Operating instructions
Vacuum suction
generator electrical
Type VAD - . . . and
VAD-...-I-...
1
Is! BF-
3
2 w
Conditions regarding the use of Festo
equipment.
This is important for reasons of safety
I. It E rnc,?S ,nyx,~kw~ that only properly nsiructed and
qualified personnel use this equipment.
2. This equipment should only be used within the limjts
detailed in the technIcal specification. Strict observance of
the technical specificabon should be ensured at all times.
3. Correctly prepared compressed ar should be used at
all trnes. When mstalling the equipment and thereafter, the
Customer shall ensurethattheenvlronmental condItionsat
the place of use are taken Into consideration.
4. If the equipment is mcorporated I” a system or used
withr safety devices or arcuits, the Customer shall ensure
that national and local safety laws and regulatmns are ob-
served.
5. Should you require further lnformatnn please contact
your local F&o office.
These instructions are important. Please keep them in
a safe place.
Die Einhaltung der )eweils angegebenen Grenzwerte fur
Was ist beim Einsatz von Festo Elementen zu
Drixke, Betatigungskrafte, Temperatures und die Beach-
tung “on Him&&- ist Voraussetzung fur die ordnungs-
gem&e Funktion und daher wxn Amender unbedmgt zu
beachten?
gewihrleisten.
Es 1st auf den Betrieb mit ordnunqsqemLil3 aufbereiteter
Druckluft ohne aggressive.Medien-zi achten. Aul3erdem
smd die iewe~l~gen Umweltbedingungen am E~nsatzort zu
berticksichtigen.
Bei Anwendung van Festo Elementen im S~cherhatsbe-
reich sind stets such die ieweillqenvorschriften der Elerufs-
genossenschaft und de T&hn~schen ilberwachungs-
Vereins bzw. die entsprechenden nation&n Eesbmmun-
ge” zu beachten.

Festo VAD Series Specifications

General

Protection class	IP20
Series	VAD
Input Voltage	3 x 380 ... 480 V AC
Communication	CANopen, Modbus RTU
Frequency range	0 ... 400 Hz
Ambient temperature range	0 ... 40 °C
Relative humidity	5% to 95% (non-condensing)
Control modes	V/f control
Overload capacity	150% for 60 seconds

Summary

Operating Instructions and Safety

Conditions for Safe Use

Emphasizes instruction for qualified personnel, adherence to specifications, air quality, and safety laws.

Product Overview and Technical Data

Operating Parts and Connections

Identification of physical components and connection points on the VAD unit.

Technical Data

Key specifications including medium, operating temperature, pressure, and materials.

Installation, Transport, and Operation

Transport and Storage Guidelines

Specifies storage temperature range (-20 to +50°C) to maintain functionality.

Mechanical Installation

Proper unit positioning for access and supply port diameter recommendation.

Electrical Installation

Ensuring correct switching voltage (24V DC ±10%) and wiring for vacuum/ejecting signals.

Operation Principles for VAD-...-I-...

Solenoid valves must be energized alternately to avoid overlapping functions.

Maintenance and Accessories

Care and Maintenance Procedures

Instructions for checking and cleaning the nozzle and silencer.

Available Accessories

List of optional accessories such as suction cups, gauges, filters, and sockets.

Performance Characteristics

Vacuum vs. Operating Pressure Curves

Graph showing vacuum level achieved at different operating pressures for various models.

Air Consumption vs. Operating Pressure Curves

Graph illustrating compressed air consumption based on operating pressure for different models.

Noise and Troubleshooting

Noise Level vs. Operating Pressure

Graph showing noise level (dBA) relative to operating pressure for various models.

Troubleshooting Common Issues

Identifies common problems like low vacuum and provides remedies for them.