Festool CDD 9.6 User Manual

CDD 9.6
CDD 12
Bedienungsanleitung Akku-Bohrschrauber 4 - 8
Operating Instructions Cordless Drill/Screwdriver 9 -12
Mode demploi Perceuse visseuse á accumulateur 13 - 17
Instrucciones de servicio Taladradora-atornilladora con acumuladores 18 - 22
Istruzioni duso Trapano-avvitatrice a batteria 23 - 27
Gebruiksaanwijzing Accu-schroefboormachine 28 - 32
Bruksanvisning Ackumulatordriven-borrskruvdragare 33 - 37
Käyttöohje Akkukäyttoinen ruuviporakone 38 - 41
Driftsvejledning Akku-boreskruemaskine 42 - 45
Bruksanvisning Akkumulator-boreskrujern 46 - 49
Instruções de uso Furadeiras parafusadeiras com acumulador 50 - 54
Ðóêîâîäñòâî ïî ýêñïëóàòàöèè Àêêóìóëÿòîðíûå äðåëü-îòâ¸ðòêè 55 - 59
Návod k obsluze Akumulátorové vrtaèky+roubováky 60 - 63
Instrukcja obs³ugi Akumulatorowe wiertarko-wkrêtarki 64 - 67
Kezelési utasítás Akku-fúró-csavarozó 68 - 71
Ïäçãßá ëåéôïõñãßáò Âéäïôñýðáíá óõóóùñåõôþí 72 - 76
Festool GmbH Wertstr. 20 D-73240 Wendlingen ( 07024/804-0
462 832_004
Seen at Ideal Tools.

Festool CDD 9.6 Specifications

General

Brand	Festool
Model	CDD 9.6
Category	Drill
Language	English

Summary

Directions for Use

Safety Precautions

Important safety instructions for operating the tool and handling battery packs.

Operational Data

Technical data regarding noise level and vibration acceleration.

Preparation for Initial Operation

Removing the Battery Pack

Instructions on how to detach the battery pack from the tool unit.

Charging the Battery Pack

Details on charging procedures for various battery chargers and LED indicators.

Fitting the Battery Pack into the Tool

Steps to correctly insert and secure the charged battery pack into the tool.

Initial Operation

Changing Rotation Direction

Procedure for switching between clockwise and anticlockwise rotation.

Shifting Speeds

How to change between the two available speed settings.

Torque Adjustment

Guidance on setting the appropriate torque for screws and drilling.

Tool Holding Fixtures and Attachments

Chuck BF-FX

Instructions for fitting, removing, and changing tools with the BF-FX chuck.

Angle Attachment DD-AS

Details on fitting, removing, and positioning the DD-AS angle attachment.

Eccentric Attachment DD-ES

Procedure for fitting, removing, and using the DD-ES eccentric attachment.

Tool Holding Fixture in Drill Spindle

Direct fitting of bits into the drill spindle for a lighter, shorter machine.

Accessories and Tools

Wall Mounting for Chargers

Application and Maintenance Instructions

Recycling Battery Packs

Warranty Information