Festool CT 15 E HEPA - After Finishing Work

6
HEPA HF-CT MINI/MIDI-2/CT15
204
201
NF-CT MINI/MIDI-2/CT15
204 202
9.6 After finishing work
► Switch off the mobile dust extractor and
pull out the mains plug.
► Vacuum and wipe the inside and outside of
the mobile dust extractor to clean it.
► Empty the dirt trap.
► Wind up the mains power cable.
► Place the mains power cable [4-1] in the
sealable depot. To do so, lay the power ca
ble through the recess [4-2].
► Disconnect the suction hose [5-1] and fix it
to the mobile dust extractor using the suc
tion hose attachment [1-3].
► Regularly clean the fill level sensors [7-1]
and check for damage.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
The lid of the depot also serves as a stor
age area for tools.
4
4-1
4-2
5
5-1
1-3
English
13