10
Technical data
Functional description
The pictures for the functional description are on a
fold-out page at the beginning of the instruction
manual. When reading of the manual you can fold
out this page for having always an overview of the
machine.
Operation
Consider the pictures on the fold-out page.
Extension Cord
If an extension cord is required, it must have suffi-
cient cross-section to prevent an excessive drop in
voltage or overheating. An excessive drop in voltage
reduces the output and can lead to failure of the
motor. The table below shows you the correct cord
diameter as a function of the cord length for this
tool.
Use only U.L. and CSA listed extension cords.
Never use two extension cords together. Instead,
Dust extractor
Power consumption 8.3 A
Maximum appliance socket connected load 12 A
Max. suction capacity (air), extractor/turbine 108 m³/h / 180 m³/h
Max. vacuum, turbine 96 static water lift (200 hPa)
Filter surface area 4.08 ft² (3786 cm²)
Suction hose D 1 1/16 x 3/32"
(D 27 mm x 3.0 m-AS)
Length of the net cable 16.4 ft (5.0 m)
Sound pressure level as per EN 60704-2-1 / Uncertainty K 67 dB(A) / 3 dB
Protection class IP X0
Container capacity 1.19 gal. (4.5 l)
Dimensions L x W x H only CT SYS HEPA 15.6 x 11.7 x 6.2" (396 x 296 x 162 mm)
CT SYS HEPA with storage box 15.6 x 11.7 x 10.6" (396 x 296 x 270 mm)
Weight CT SYS HEPA with storage box 15.2 lbs. (6.9 kg)
[1-1]
Dust extractor
[1-2]
Storage box
[1-3]
Extractor hose
[1-4]
Handle
[1-5]
Angle adapter
[1-6]
T-LOC latch for Systainers
[1-7]
Cold-device plug
[1-8]
On/Off switch
[1-9]
AUTO/MAN switch
[1-10]
Appliance socket
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the machine’s
name plate.
Observe country-specific regulations.
Total Extension Cord
Lenght (feet)
25 50 100 150
Cable size (AWG) 18161412
To Next Page
Loading...
