15
CTL
8.3 After finishing work
XOnly versions with AutoClean: Clean the main
filter automatically or manually (see chapter
7.3).
XSwitch off the mobile dust extractor and pull
out the mains plug.
XWind up the mains power cable.
XEmpty the dirt trap.
XPlace the mobile dust extractor in a dry room
inaccessible to unauthorised users.
9 Service and maintenance
WARNING
Risk of injury, electric shock
XAlways disconnect the mains plug from the
socket before performing maintenance work
on the machine!
XAll maintenance and repair work which re-
quires the motor housing to be opened must
only be carried out by an authorised service
workshop.
Customer service and repair. Only
through manufacturer or service work-
shops: Please find the nearest address
at: www.festool.com/Service
1
2
3
5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
XClean the level sensors [5] and empty the dirt
trap [1-11] regularly.
Observe the following instructions:
– The manufacturer or an instructed person
must perform a dust test at least once a year
to determine whether the filter is damaged, the
machine is sealed properly and the monitoring
features are functioning correctly.
– Anything that cannot be cleaned must be dis-
carded in impermeable bags. Observe appli-
cable disposal regulations!
9.1 Filter bag / disposal bag / main filter
XRemove the filter bag [6].
XInsert the filter bag [7].
XRemove the disposal bag [8].
XInsert the disposal bag [9].
XChange the main filter [10].
Dispose of the used filter in accordance with
statutory regulations.
The order numbers for accessories, filters
and consumables can be found in the
Festool catalogue or on the internet at
www.festool.com.
10 Environment
Do not dispose of electric power tools
in household waste! Recycle devices,
accessories and packaging! Observe
the valid national regulations.
To Next Page
Loading...
