Festool SCA 8 - Product Component Identification; Key Component Descriptions; Operating the Charger; Initial Setup and Charging

– There is a risk of vapours being released if the battery pack is dam
aged or not used correctly. The vapours may irritate your airways. Seek
fresh air and consult a doctor if you feel unwell.
2 Technical data
Charger TCL 6 TCL 6 DUO SCA 8
Power supply (input) 220 V~ 220 V~ 220 V~
Mains frequency 60 Hz 60 Hz 60 Hz
Charging voltage (out
put)
10.8–18 V Output1: 10.8–18 V
Output2: 10.8–18 V
10.8–18 V
Rapid charging Max. 6 A Output1: Max. 6 A
Output2: Max. 6 A
Max. 8 A
Charging times for BP, BPS and BPC battery packs, approx.
1.5 Ah 26 min. 26 min. 26 min.
2.6 Ah 46 min. 46 min. 46 min.
4.2 Ah 76 min. 76 min. 76 min.
3.1 Ah* 33 min. 33 min. 33 min.
4.0 Ah* 32 min. 32 min. 32 min.
5.2 Ah* 45 min. 45 min. 33 min.
6.2 Ah* 53 min. 53 min. 40 min.
Permitted charging
temperature range of
the battery pack
-5 °C to +55 °C
Temperature monitoring via NTC resistor
3 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Read the operating manual and safety
warnings.
For indoor use only
T
Fuse with specification of current value
Safety transformers
Safety class II
Do not dispose of it with domestic
waste.
Do not dispose of it with domestic
waste.
Handling instruction
4 Intended use
Chargers suitable
– For internal use only.
– For charging Festool Li-ion battery packs
BP, BPS and BPC with the following rated
voltages and capacities:
10.8 V (3S1P) 1.3 Ah, 1.5 Ah
10.8 V (3S2P) 2.6 Ah, 3.0 Ah, 4.2 Ah
14.4 V (4S1P) 1.3 Ah, 1.5 Ah
English
10