13
STL 450
GB
placed by the manufacturer or a cus-
tomer service workshop in order to
ensure that your device operates re-
liably.
–
Check the mains plug and the power
cable regularly in order to prevent a
hazard.
Disconnect any damaged
power cables from the power supply
immediately and have them replaced
by an authorised service workshop.
–
When placing the device on a tripod,
ensure that it is stable.
In the event
of unstable footing or insecure
mounting, the device may fall and
cause physical injury, electric shock
or material damage.
–
Place the tripod on a dry, level and
stable surface.
If the legs of the tri-
pod are not folded out to the limit
stop or if the tripod has unstable
footing, this can cause physical inju-
ry, electric shock or material dam-
age.
– Discontinue use if device is damaged.
– Device is no toy! Keep away from
children.
3 Intended use
The grazing light is designed for inspect-
ing surfaces when working on rough sur-
face areas. Ensure the electrical safety of
all electricity sources.
The device is
not
suitable for illuminating
rooms in residential buildings.
The user is liable for improper
or non-intended use.
4Technical data
Grazing light STL 450
Nominal voltage 220-240 V
Frequency 50/60 Hz
Lighting device 64 x 0,25 W LED 5000 K
Maximum output 18 W
LED luminous flux 1200 lm
Colour temperature 5000 K
Colour rendering index, Ra >80
Service life (L70) >10,000 h
Permitted operating temperature range -10°C to +45°C
Maximum height (upper edge of grazing
light range) with adapter and tripod
2.50 m
To Next Page
