3
TABLE OF CONTENTS ________________________________________
SAFETY TIPS ___2___
INTRODUCTION ___4___
The Tube Amplifier
INSTALLATION OF THE DEVICE ___5___
Unpacking
Contents of the package
Description of the elements of the amplifier
Installation of the vacuum tubes
Where to place your amplifier
INTERCONNECTIONS ___9___
Hook-up of the power supply cord
Hook-up of the signal sources
Hook-up of the speakers
FIRST POWER-UP AND GETTING STARTED ___11___
ADJUSTMENT AND CONTROL OF THE BIAS CURRENTS ___12___
The procedure for adjustment of the bias for the right channel
The procedure for adjustment of the bias for the left channel
“BURNING-IN” THE AMPLIFIER ___14___
TECHNICAL DATA ___15___
LIMITED WARRANTY CONDITIONS ___16___
To Next Page
Loading...