SAFETY SIGN LOCATIONS
INSTRUCTIONS
x Keep all safety signs clean and legible.
x Replace all missing, illegible, or damaged safety signs.
x Replacement parts for parts with safety signs attached must also have safety signs attached.
x Safety signs are available, free of charge, from your dealer or from FFC Attachments.
PLACEMENT OR REPLACEMENT OF SAFETY SIGNS
1. Clean the area of application with non-flammable solvent, then wash the same area with soap and water.
2. Allow the surface to fully dry.
3. Remove the backing from the safety sign, exposing the adhesive surface.
4. Apply the safety sign to the position shown in the diagram above and smooth out any bubbles.
ITEM #3
ITEM #1
5
ITEM #2
ITEM#4
ITEM #5 ITEM #6
To Next Page
Loading...
