2.1
2.2
2.3
www.fhiaba.com ∙ info@fhiaba.com ∙ Info Line 800-344222 ∙ Tel +39 (0)434 420160 ∙ Fax +39 (0)434 420161
Make sure that installation is performed correctly, adhering to all
directions in the specific installation manual provided with
the appliance.
Installation
Connection to the electrical power supply
The appliance is equipped with a Schuko type 16A plug and must
be connected to the electrical power supply through a corresponding
Schuko socket.
Do not use extension cords and/or multiple adapters for the power
supply connection.
The models provided with Ice Maker require a connection to the
domestic water supply system. This can be executed through the
provided water hose with 3/4” threading.
The system pressure must be between 0.05 MPa and 0.5 MPa (between
0.5 Bar and 5 Bar).
Differents pressures can cause malfunctions or leaks in the water system.
The appliance should be supplied only with drinkable water.
Do not use extension cords and/or multiple
adapters for the power supply connection.
The appliance should be supplied only with
drinkable water.
Make sure that installation is performed correctly,
according to all of the directions in the specific
installation manual provided with the appliance.
Connection to the water system
Installation
To Next Page
Loading...