CHARLOTTE DE NUIT Bedside Table
Art. 1510-1511
Product description and intended use
1
EN
1.1) Product description and composition
The CHARLOTTE DE NUIT Bedside Table - Art. Code 1510-1511 is intended as an item of indoor furniture. It is manufactured from curved,
annealed float plate glass. The CHARLOTTE DE NUIT Bedside Table was produced at the FIAM ITALIA SPAA factory at Via Ancona 1/B,
61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it.
1.2) Intended use
The article known as CHARLOTTE DE NUITis designed and built to serve as an indoor Low Table and must therefore be used only
for this purpose and no other.
For more information about the product's intended use please refer to section “2) SAFETY INSTRUCTIONS”.
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below.
If in doubt or if you require further information concerning the use of the product, please contact us on the telephone numbers
stated in this document.
2.1) Transporting and storing the CHARLOTTE DE NUIT Bedside Table in the original packaging
The CHARLOTTE DE NUIT Bedside Table, in its original packaging (2 packs if you have also purchased the additional shelf), must
be transported taking the greatest care to prevent knocks and shaking. It must be stored indoors in a dry place.
Place the Bedside table CHARLOTTE DE NUIT in the original packaging, in the horizontal position. The arrows on the label on the
packaging must be vertical and pointing upward.
Never place weights or loads in excess of 20 Kg on the original packaging, since exceeding this weight may cause the breakage
of the article.
The CHARLOTTE DE NUIT Bedside Table in the original packaging weighs about 22 kg. It must therefore be placed on surfaces
capable of supporting its weight.
2.2) Removing the packaging - assembly
To remove the original packaging of the CHARLOTTE DE NUIT Bedside Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not strike the CHARLOTTE DE NUIT Bedside Table with
hammers or pointed items which may crack or shatter the glass.
c) Remove CHARLOTTE DE NUIT Bedside Table from its packaging. At least two people are required for this operation.Wear gloves
which assure a good grip on the float glass..
d) If you have purchased the optional glass shelf, put it in place as shown below.
Safety instructions
2
To Next Page
Loading...