Fiamma Turbo-Vent P3 Installation And Use Instructions

The fan doesn’t rotate Power voltage is less
than 10 Vdc
The cables are
incorrectly connected
Foreign bodies are
blocking the blade
Power failure
None of the above
causes
The fan rotates without
ventilating the inside of the
vehicle
Deviator in exhaust position
Set the deviator to
ventilation mode
* Ensure that the power supply has been disconnected before carrying out
any kind of operation, than reconnect.
FROM NOW ON YOU CAN ENRICH
YOUR
WITH THE CONVENIENT AND ELEGANT ADDITIONAL KIT
TURBO-VENT P3
Problem
Cause
Solution
Charge the battery,check
that the voltageis 12 Vdc
Check that connections
correspond to wiring
diagram*
Remove any obstructions
from the blade*
Check the fuses in the
main control panel*
Contact your Fiamma
Service Centre
®
11
TROUBLESHOOTING
EN

Fiamma Turbo-Vent P3 Specifications

General

Brand	Fiamma
Model	Turbo-Vent P3
Category	Fan
Language	English