What to do if my Fiamma Fan doesn’t rotate?
If the Fiamma Fan isn't rotating, first, ensure the power voltage isn't below 10 Vdc; if it is, charge the battery and verify a 12 Vdc voltage. Next, check the cable connections against the wiring diagram. Also, inspect the blade for any obstructions and remove them. Then, check the fuses in the main control panel. If none of these resolves the issue, contact a Fiamma Service Centre.
Why is my Fiamma Fan rotating but not ventilating?
If the Fiamma Fan rotates but doesn't ventilate the vehicle's interior, the deviator might be in the exhaust position. To fix this, simply set the deviator to ventilation mode.
What to do if my Fiamma Motorhomes fan doesn't rotate?
If the fan isn’t rotating, here are a few things to check: * Ensure the power voltage is at least 10 Vdc by charging the battery and verifying a 12 Vdc voltage. * Confirm that the cables are correctly connected according to the wiring diagram. * Make sure no foreign objects are blocking the fan blade. * Check the fuses in the main control panel to rule out a power failure.
Why is my Fiamma Motorhomes fan rotating but not ventilating?
If the fan rotates but doesn't ventilate the vehicle's interior, the deviator might be in the exhaust position. Set the deviator to ventilation mode to resolve this.
General| Type | Roof Vent Fan |
|---|---|
| Model | Turbo-Vent P3 |
| Power Supply | 12V DC |
| Power Consumption | 36W |
| Material | UV-resistant plastic |
| Diameter | 300 mm |
To Next Page
