FIAS LIGHTING PTY LTD
Page 3
Assembly instructions
Image 1:
1. Mount the Bracket that is supplied with the Ceiling fan to a solid structure as
mentioned before. Use the two long screws that are provided in the packaging
to secure the bracket onto the ceiling. (Image 1). A licensed electrician should
complete the wiring.
Image 2
2. Once the Mounting Bracket has been installed,
you may start the assembly of the ceiling fan.
Remove the two screws that are on the cover
plate which is located on the top of the ceiling
fan. As shown in the diagram. This will give you
access to mount the blades on the ceiling fan.
(Image 2)
Please do not throw the screws or the cover plate.
as you will require them later on.
To Next Page
Loading...