Personal Settings (Customer-Programmable
Features)
Dimmer
The EVIC display is provided with a light sensor capable
of detecting environmental light conditions and adjust-
ing the brightness of the instruments accordingly.
NOTE: The brightness of the instrument panel may
change while travelling following an event that causes
switching from “day” to “night” conditions (or vice
versa) in the passenger compartment (e.g. in a tunnel, on
avenues in shadows, under bridges, etc.).
To adjust the brightness, proceed as follows:
1. Press the UP
or DOWN button to set the
required brightness level.
2. Briefly press the SET ESC button to go back to the
menu screen or press and hold the SET ESC (approxi-
mately one second) to go back to the main screen
without storing settings.
Speed Beep (Speed Limit)
With this function it is possible to set the car speed limit
(mph or km/h); when this limit is exceeded the driver is
immediately alerted.
To set the speed limit, proceed as follows:
1. Briefly press the SET ESC button. The display will
show the message (Speed Beep).
2. Press the UP
or DOWN button to select speed
limit activation (On) or deactivation (Off).
164 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
