3. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the SET ESC button
(approximately one second) to go back to the main
screen without storing the settings.
Belt Buzzer (Buzzer Activation For S.B.R.
Indication)
This function will only be displayed after a FIAT Group
Automobiles studio has deactivated the S.B.R. system.
Daytime Running Lamps (DRL)
This function may be used to activate / deactivate the
Daytime Running Lamps.
Proceed as follows to switch this function on or off:
1. Briefly press the SET ESC button to display the three
sub-menus.
2. Briefly press the SET ESC button. “On” or “Off” will
flash on the display (according to previous setting).
3. Press the UP
or DOWN button for setting.
4. Briefly press the SET ESC button to go back to the
menu screen, or press and hold the button (approxi-
mately one second) to go back to the main screen
without storing the settings.
GSI (Gear Shift Indicator)
This function may be used to set the Gear Shift Indicator
in two submenus: “Fuel Econ On” and “Fuel Econ Off.”
• Fuel Econ On – turns on a fuel economy upshift light
in the instrument cluster, for optimum fuel economy,
when operating in base driving mode.
• Fuel Econ Off – the fuel economy upshift light is
disabled.
To set the required unit, proceed as follows:
1. Briefly press the SET ESC button to display the two
sub-menus.
172 UNDERSTANDING YOUR INSTRUMENT PANEL
To Next Page
Loading...
