NOTE:
•
The setting will increase or decrease by one unit each
time the + or – button is pressed. Press and hold the
button to increase/decrease the setting rapidly. Save
the setting by briefly pressing the button when you
approach the required setting.
•
Briefly press the MENU ESC button to return to the
“Time” sub-function.
•
When accessing the “Mode” submenu, briefly press
the MENU ESC button. The previously set display
format will flash on the display.
•
Press the + or – button to select “24h” or “12h.”
When you have selected the required settings, briefly
press the MENU ESC button to go back to the Time,
Mode sub-menu screen, or press and hold the MENU
ESC button (approximately one second) to go back to the
main screen without storing the settings.
Set Date
This function may be used to set the date (day - month -
year).
To change the date proceed as follows:
1. Briefly press the MENU ESC button and “year” will
flash on the display.
2. Press the + or – button for setting.
3. Briefly press the MENU ESC button and “month” will
flash on the display.
4. Press the + or – button for setting.
5. Briefly press the MENU ESC button and “day” will
flash on the display.
6. Press the + or – button for setting.
NOTE: The setting will increase or decrease by one unit
each time the + or – button is pressed. Press and hold the
4
UNDERSTANDING YOUR INSTRUMENT PANEL 155
To Next Page
