To activate (On) or to deactivate (Off) the speed display
feature, proceed as follows:
1. Briefly press the MENU ESC button. “MPH”, “km/
h”, then “Off” will flash on the display (according to
previous setting).
2. Press the + or – button to select display deactivation
“Off”, “MPH” or “km/h”.
3. Briefly press the MENU ESC button to go back to the
menu screen, or press and hold the MENU ESC button
(approximately one second) to go back to the main
screen.
Autoclose
With this function active, the doors will automatically
lock at when the vehicle’s speed exceeds 15 mph
(24 km/h).
To change the setting proceed as follows:
1. Briefly press the MENU ESC button “On” or “Off”
will flash on the display (according to the previous
setting).
2. Press the + or – button for setting.
3. Briefly press the MENU ESC button to go back to the
menu screen, or press and hold the MENU ESC button
(approximately one second) to go back to the main screen
without storing the settings.
Units (Set Units)
This function may be used to set the measurement unit in
three submenus: “Distance,” “Temperature” and “Fuel
Economy.”
To set the required unit, proceed as follows:
1. Briefly press the MENU ESC button to display the
three sub-menus.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 157
To Next Page
