182
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
FOR CHECKING AND RESTORING PRESSURE ONLY
The compressor can be also used just for restoring pressure. Disconnect
the quick connection and connect it directly to the tyre valve; in this way
the cylinder is not connected to compressor and the sealing fluid will not
flow into the tyre.
CYLINDER REPLACEMENTPROCEDURE
To replace cylinder proceed as follows:
❒ disconnect connection (A);
❒ turn counter-clockwise the cylinder to replace and raise it;
❒ fit the new cylinder and turn it clockwise;
❒ connect connection (A) to the cylinder and fit the transparent tube (B)
into the proper space.
FOE0716m
FOE0721m
To Next Page
Loading...
