192
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONSINDEX
DASHBOARD
AND CONTROLS
IN AN
EMERGENCY
IF AN INTERIOR LIGHT BURNS OUT
For the type of bulb and power rating, see “If a bulb burns out”.
FRONT CEILING LIGHT
To replace the 12V-10W cylindrical bulbs:
❒ remove plastic caps (A) and casing (B) using a screwdriver;
❒ unscrew the four screws (two in A and two in B) and slide the ceiling
light downwards toward the windscreen;
❒ disconnect connector (D) from (C);
❒ lift cover (E) using a screwdriver;
❒ replace the burn out bulb;
❒ reconnect the electrical connector and refit the ceiling light first
clicking it into place then securing it with the screws. Refit the plastic
caps (A) and the casing (B).
F0E0255m
F0E0623m
To Next Page
Loading...
