FIBARO FGBHS-213 - User Manual

CONTENTS
#1: Description and features 3
#2: Supported loads 4
#3: Installation 5
#4: Pairing the accessory 7
#5: Reset 8
#6: Functionality 9
#7: Congurable parameters 11
#8: Specications 12
#9: Regulations 13
OPERATING
MANUAL
EN
FIBARO
SINGLE SWITCH
FGBHS-213

Summary

Important Safety Information

Product Description and Features

Supported Loads

Installation Guide

Accessory Pairing Process

Resetting the Device

Device Functionality

Power Consumption Monitoring

Monitors and reports current active power consumption to the iOS device.

Energy Consumption Monitoring

Measures and reports cumulative energy consumption to the iOS device.

Malfunction Detection and Control

Malfunction Detection

Detects and reports device malfunctions like overheating, overload, and communication issues.

Maintenance Load Control

Allows turning connected loads on/off for testing, even without pairing.

Device Identification

Helps identify the device via HomeKit by visual or state changes.

Configurable Parameters

Switch Type Configuration

Selects the type of wall switch (momentary or toggle) connected to the device.

Power Failure State Restore

Determines if the device restores its previous state after power is restored.

Technical Specifications

Regulations and Compliance

Legal Notices and Trademarks

Contains information on product specifications, changes, and trademark ownership.

WEEE Waste Disposal

Instructions for proper disposal of the device as electrical waste.

Declaration of Conformity

States the device's compliance with essential requirements of Directive 2014/53/EU.

FIBARO FGBHS-213 Specifications