To Next PageTo Next Page
Need help?Do you have a question about the FIBARO FGDW-002 and is the answer not in the manual?
General| Interface | Z-Wave |
|---|---|
| Product color | Beige |
| LED indicators | Yes |
| Operating frequency | 868.4 MHz |
| Maximum indoor range | 40 m |
| Maximum outdoor range | 50 m |
| Connectivity technology | Wireless |
| Battery type | ER14250 |
| Power supply input voltage | 3.6 V |
| Sustainability certificates | RoHS |
Weight and Dimensions| Depth | 71 mm |
|---|---|
| Width | 18 mm |
Procedure to add the device to an existing Z-Wave network via learning mode.
Procedure to remove the device from an existing Z-Wave network via learning mode.
Illustrations showing correct and incorrect placement of the sensor and magnet.
Visual guide on aligning the magnet with the sensor for proper detection.
Explanation of the tamper buttons, their locations, and functions for security and control.
How the sensor is represented and controlled within the FIBARO Home Center interface.
Details the three association groups: Lifeline, On/Off, and Tamper, and their functions.
Step-by-step instructions for adding associations using the Home Center controller.
Configuration of the device's wake-up frequency to balance communication and battery life.
