Need help?Do you have a question about the FIBARO Home Center 3 Lite and is the answer not in the manual?
General| RAM | 512 MB |
|---|---|
| Storage | 8 GB eMMC |
| Dimensions | 90 x 90 x 33 mm |
| Operating Temperature | 0°C to 40°C |
| Wireless Communication | Wi-Fi |
| Protocols | Z-Wave, Wi-Fi |
| Z-Wave Frequency | EU: 868.4 MHz, US: 908.4 MHz, AU: 921.4 MHz |
| Wi-Fi | 802.11 b/g/n |
| Power Supply | 5V DC, 1A |
| Connectivity | Ethernet, USB |
Details critical warnings and cautions for product use, including handling, environment, and repair.
Guides through the initial setup process, including connecting power, downloading the app, and following instructions.
Provides an alternative method for configuration via a web browser, using default credentials.
Manual process for adding Z-Wave devices using the Configuration Interface and Inclusion Mode.
Explains how to add Z-Wave 3.0 devices using the SmartStart feature and DSK codes.
Procedure to remove Z-Wave devices from the network using Exclusion Mode via the Configuration Interface.
Steps to remove Z-Wave devices that have already been added to the system.
Method for forcefully removing Z-Wave devices that may not respond to standard procedures.
How to control devices and view their last known status using the Dashboard interface.
Details on accessing device tabs (General, Advanced, Configuration) for detailed settings and management.
Explains how to perform actions on devices based on their specific command classes like Basic, Switch, Scene, and Color.
Step-by-step guide to creating associations between Z-Wave devices for direct control.
Procedure for adding or removing the gateway to/from an existing Z-Wave network.
Guide on how to adjust device parameters via the Configuration Interface to customize behavior.
Explains how to check network status via indicator lights and the Configuration Interface.
Instructions for connecting the gateway to a Wi-Fi network and setting static or dynamic IP addresses.
Details on configuring HTTP and HTTPS protocols for secure communication with the gateway.
Defines the roles of Admin and User, outlining their respective permissions and capabilities.
How to enable or disable remote access to the gateway for managing devices from outside the home.
Lists various Z-Wave network management options like reconfiguring devices, resetting, and polling.
Introduces automation scenes and describes three types: Block, Lua, and Scenarios.
Step-by-step guide to creating new scenes, including naming, triggering, and assigning icons.
Guide on creating custom thermostats by connecting temperature sensors and actuators.
Instructions for creating climate zones, either automatically or manually selecting devices.
Details on setting operating modes (Heating, Cooling, Auto, Off) and schedules for climate zones.
Introduction to setting up automatic control for sprinklers and watering schedules.
Steps to set up sprinkler devices, including naming, default watering, and sensor configuration.
Instructions on how to access Recovery Mode by using the device's physical button.
Guide on using auto-repair to fix issues after a system update by reverting to a previous copy.
How to switch between the two system copies (A and B) in Recovery Mode.
Procedure to restore the operating system to a previous version or from a file without data loss.
Instructions on how to reset only network settings to resolve connectivity issues.
Guide on recovering the system, which includes a full data reset and reinstallation.
Steps to download and install firmware updates for the gateway itself.
Steps to create cloud backups, requiring configured remote access.
Guide on creating local backups of the system configuration on your computer.
Information on restoring backups, including cloud backups and options for version compatibility.
Steps to restore a backup directly from the list of available backups.
To Next Page
