FIBARO Motion Sensor - Page 11

FIBARO Motion Sensor is a universal, Z-Wave compatible multi-sensor. This
device has a built-in motion sensor, temperature sensor and light sensor.
Additionally, through vibrations detection, it may detect tampering attempt or
an earthquake. FIBARO Motion Sensor is battery powered, completely
wireless, and its casing allows for quick and non-invasive installation on any
surface. The eye of the sensor visually indicates motion, temperature level,
operating mode or may inform about Z-Wave network range.
Motion Sensor
Smoke Sensor
FIBARO Smoke Sensor is an ultra-light, universal, battery powered optical
smoke detector, operating under the Z-Wave standard, designed to be placed
on the ceiling. Smoke alarm is signaled with a built-in siren, blinking LED
indicator and by sending commands to Z-Wave network devices. Additionally,
the device is equipped with a sensor, which may trigger an alarm after
exceeding the specified temperature threshold.
FIBARO Wall Plug is a universal, Z-Wave compatible, remotely controlled
outlet adapter. This device may be applied wherever you want to control
electrical devices with up to 2,5 kW load. Wall Plug is equipped with a power
and energy metering function. It uses a LED ring to visualize the current load
with colour changing illumination and current operating mode. This is the
smallest and most attractive device of this type available in the world.
Wall Plug
Kit components
EN
11