Need help?Do you have a question about the FiberHome AN5121-4GP and is the answer not in the manual?
General| WiFi | No |
|---|---|
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
Provides a comprehensive overview of the AN5121-4GP, its capabilities, and design.
Details the typical network scenarios and deployment strategies for the AN5121-4GP.
Lists the detailed technical specifications, parameters, and performance metrics of the AN5121-4GP.
Illustrates the physical appearance of the AN5121-4GP, including its design and layout.
Explains the function and meaning of each indicator LED on the AN5121-4GP unit.
Details the various ports and connectors available on the AN5121-4GP for connectivity.
Outlines the necessary checks and conditions before installing the AN5121-4GP.
Describes the procedure for installing the AN5121-4GP in a plane or flat surface.
Details the steps for mounting the AN5121-4GP onto a pole using specific components.
Provides instructions for securely mounting the AN5121-4GP onto a wall.
Explains how to install the AN5121-4GP into a standard cabinet rack.
Guides on how to perform checks after the AN5121-4GP has been installed.
Troubleshooting steps for when all indicator LEDs remain off after powering the device.
Addresses issues where the device unexpectedly stops functioning during operation.
Troubleshooting guide for when the Loss of Signal (LOS) indicator is active.
Resolves issues with Power over Ethernet (PoE) not being supplied to connected devices.
Addresses intermittent power supply problems with Power over Ethernet (PoE) connections.
To Next Page