EasyManuals Logo

FiberHome AN5506-02-A User Manual

FiberHome AN5506-02-A
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
4 Web Configuration Guide
Table 4.3 Parameters for Broadband Settings (Continued)
Item
Description
the Internet and generates
traffic, the ONU dials
automatically to connect. When
the subscriber is idle and no
traffic exists, the ONU will stop
dialing automatically after the
set disconnection time interval
expires.
u Manual: Connects by dialing
manually.
IP Address
Enter the static IP address at the
WAN side provided by ISP.
This item should be
configured when the
WAN IP Mode is set to
static.
Subnet
Mask
Enter the subnet mask provided by
ISP.
Default
Gateway
Enter the default gateway provided
by ISP.
Primary
DNS Server
Enter the IP address of the active
DNS server provided by ISP.
Secondary
DNS Server
Enter the IP address of the standby
DNS server provided by ISP.
IPv6
Address
Enter the static IPv6 address at the
WAN side provided by ISP.
This item should be
configured when the
IP Mode is set to
IPv4&IPv6 and the
WAN IP Mode is set to
static.
IPv6 Prefix
Length
Enter the static IPv6 address prefix
length at the WAN side provided by
ISP.
Default
Gateway
Enter the default gateway provided
by ISP.
Primary
DNS Server
Enter the IP address of the active
DNS server provided by ISP.
40

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome AN5506-02-A and is the answer not in the manual?

FiberHome AN5506-02-A Specifications

General IconGeneral
BrandFiberHome
ModelAN5506-02-A
CategoryModem
LanguageEnglish

Related product manuals