EasyManuals Logo

FiberHome AN5506-02-A User Manual

FiberHome AN5506-02-A
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
4 Web Configuration Guide
Table 4.3 Parameters for Broadband Settings (Continued)
Item
Description
IP Mode Select IPv4 or IPv4&IPv6.
Users need to
configure this item
when the service type
is set to INTERNET,
TR069_INTERNET or
VOIP_INTERNET and
the connection type is
set to Route.
WAN IP
Mode
Sets the IP address obtaining mode
at the WAN side of the ONU. The
options include DHCP, static and
PPPoE.
u DHCP: Obtaining the IP
address dynamically.
u Static: Setting the IP address in
a static mode.
u PPPoE: PPPoE dialing mode.
This item should be
set if the connection
type is Route.
User Name
Enter the user name provided by
ISP.
This item should be
set if the WAN IP
Mode is set to PPPoE.
Password
Enter the password provided by ISP.
Operation
Mode
Sets the PPPoE connection mode.
u Keep Alive Mode: Retry Period
seconds: The ONU dials
automatically to connect. If the
dialing fails, the ONU will re-try
dialing automatically when the
retry period expires.
u Connect when Traffic Exists:
Disconnect Period seconds:
The ONU performs connection
only when it has detected traffic.
When a subscriber accesses
39

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome AN5506-02-A and is the answer not in the manual?

FiberHome AN5506-02-A Specifications

General IconGeneral
BrandFiberHome
ModelAN5506-02-A
CategoryModem
LanguageEnglish

Related product manuals