4 Web Configuration Guide
Table 4.3 Parameters for Broadband Settings (Continued)
Item
Description
u TR069_INTERNET: this connection is applicable for both
TR069 and Internet access.
u Other: other connection.
u VOIP: this connection is only applicable for voice
application.
u VOIP_INTERNET: this connection is applicable for voice
and Internet access.
Connection
Type
Select the connection type of the WAN port.
u Bridge: the Layer 2 bridge connection mode. This
connection mode can be used when the service type is
set to INTERNET, TR069_INTERNET, or
VOIP_INTERNET.
u Route: the Layer 3 router connection mode. This
connection mode can be used for all the service types
except for Other.
VLAN ID
Sets the VLAN ID of the WAN connection.
The VLAN ID value here should be consistent with that on the
user side of the OLT.
Priority Sets the priority of the VLAN.
Nat
Enables or disables the NAT
function.
Users need to
configure this item
when the service type
is set to INTERNET,
TR069_INTERNET or
VOIP_INTERNET and
the connection type is
set to Route.
DNS Relay
Enables or disables the DNS relay
function.
MTU
Enter the maximum transmission
unit. It is recommended to use the
default value.
Lan Binding Select the LAN port to be bound with the WAN port.
38
To Next Page
Loading...
Need help?
General
