FiberHome AN5506-04-FA User Manual

FiberHome AN5506-04-FA
Instruction
Version FiberHome AN5506-04-FA
1. AN5506-04-FA Router power status
2. Internet connection Settings
3. WAN, Wireless Settings
4. DHCP Settings
5. Bridge Mode Settings
6. Forward Port Settings
7. Dynamic DNS Settings
8. Power Checking
9. Product version, Hardware and software Checking
10. Firmware Upgrading
11. Restoring to Default
12. Ping and Traceroute
13. Hardware Installation
14. Technical Specification
15. Product Overview
16. Packing List

FiberHome AN5506-04-FA Specifications

General

Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% (non-condensing)
Product Type	Fiber Optical Network Terminal
Type	Router
Ports	4 x 10/100/1000 Mbps Ethernet ports
WAN Interface	GPON
Wi-Fi	802.11 b/g/n
Power Supply	12V DC
Weight	300 g

Summary

AN5506-04-FA Router Power Status

Internet Connection Settings

Shortcut

Steps to configure internet connection via shortcut method.

General

Steps to configure internet connection via general method.

WAN and Wireless Settings

WAN Settings

Configuration steps for WAN connection type, VLAN ID, MTU, IP Mode, and PPPoE.

Wireless Settings

Steps to configure 2.4G or 5G WiFi signal, network mode, bandwidth, and channel.

DHCP Settings

Bridge Mode Settings

Forward Port Settings

Dynamic DNS

Power Checking

Product Version, Hardware and Software Checking

Firmware Upgrading

Restore to Default

Hardware (Device Reset)

Procedure for resetting the device using the hardware reset button.

Software (System Reset)

Procedure for restoring factory defaults via software interface.

Ping and Traceroute

How to Ping Test

Instructions for performing a Ping test to check network connectivity.

Traceroute Test

Instructions for performing a Traceroute test to check server route connection.

Hardware Installation

Technical Specification

Product Overview

Packing List